Chemical Technology February 2016

Non contact radar level sensors increase reliability on river sluices

Flexible, reliable, versatile GEMÜVictoria ®

VEGA water radars alongside ultrasonic sensors mounted in stilling tubes

On the River Weaver in the northern England county of Cheshire, the Dutton sluice site consists of eight large sluice gates lifted by Rotork actuators. The water level in the river determines when to open or close the sluice gates and navigation is closed to river traffic if the water level is too high. The Dutton sluice site is a key measurement point and the level monitoring needs to be very accurate. Consequently the level of the River Weaver is now measured by four instruments. The first two are ultrasonic sensors (for redundancy) mounted in stilling tubes. These tubes are required in order to reduce loss of echo issues fromweather and surface conditions. However the tubes can require substantial engineering to install, and generally they need continuous on-site maintenance to prevent blockages, or repairs to keep measurement errors to a minimum. Even with this stilling tube installation, the SCADA Maintenance engineer has commented, “In recent years we have experienced is- sues where either one or both of the ultrasonic sensors loses echo or drifts, causing level sensor failure alarms to be sent out.” As a result the Canal & River Trust (CRT) has installed two other devices alongside the ultrasonic sensors, as test instruments. De- signed and manufactured by German company VEGA, the radar level sensors VEGAPULS WL61 are unaffected by weather or surface conditions and were simply mounted on a unistrut adjacent to the stilling tubes. CRT has compared the data from both sets of instru- ments over several months and found that there was no drift with the WL61 water radars since installation. “Whilst we have seen occasions where the water level on one or both of the ultrasonic units rises, the radars have not,” commented the engineer. “As far as I can see, the WL61 radars provide more reli- able data than the ultrasonic devices. My concern with the ultrasonic sensors is that drift could create nuisance alarms and result in staff call outs.” There are also the ongoing maintenance requirements associated with the stilling tubes. “I do not have these concerns with the WL61s. In addition, I have confidence in the support from VEGA should an issue arise with any of the instruments at a later date.” This yet another example of how radar is increasing reliability and accuracy on open water applications. For more information on VEGA products in South Africa, please contact VEGA Controls SA on +27 11795 3249 or email chantal.groom@vega.com.

GEMÜ 481 Victoria ®

Elastomer seated butterfly valve: • Improved tightness thanks to special design of liner - even in case of big diameters • All-purpose applications by versatile material choice • Modular structure • Low torque values • All food- and drinking water approvals

GEMÜ VALVES AFRICA (PTY) LTD Stand 379, Northlands Business Park Hoogland Ext. 45

Northriding, Randburg Phone: (0)11 462 77 95 info@gemue.co.za www. gemu-group .com