Construction World January 2019

ROADS AND BRIDGES

WARM ASPHALT FOR ROADS IS BECOMING THE INDUSTRY STANDARD The benefits of using warm asphalt as opposed to hot asphalt on South Africa’s national highways have been boasted at an international roads conference in Durban.

Krishna Naidoo, a Material & Pavement Specialist at SANRAL’s Eastern Region.

Warm mix asphalt is safer and environmentally friendly.

K rishna Naidoo, a Material & Pavement Specialist at the South African National Roads Agency SOC Limited (SANRAL) Eastern Region said the roads agency was working towards ensuring that its stand-alone asphalt supply plants produced only warm mix asphalt (WMA). “In this way SANRAL will be leading the charge on worker safety as well as reducing its carbon foot-print in providing sustainable infrastructure. We are indeed more than roads,” Naidoo said. He was addressing delegates attending the conference themed ‘Roads to Social and Economic Growth’ arranged by the South African Road Federation (SARF) in association with the Washington- based International Road Federation (IRF) and the Paris-based World Roads Association (PIARC). Warm mix asphalt is produced using temperatures up to 50 degrees Celsius lower than what is used for traditional hot mix asphalt. Less energy is needed to heat the warm mix asphalt, so it uses less fuel, decreasing the plant's carbon footprint. It is a greener process that has less impact on the environment, with reduced hydrocarbon emissions and greenhouse gases. Due to its lower temperature, it is also safer for construction workers to use. WMA’s journey in South Africa started about a decade ago with the formation of the country’s Warm Mix Asphalt Interest Group, led by Naidoo being elected the national coordinator. The WMA Interest Group led three major national trials that culminated in the publication of the South African Bitumen

Association (Sabita) Best Practice guidelines and specifications for warm asphalt. “Through the process of these trials, the asphalt industry renewed its commitment to excellence, quality and efficiency. “But more importantly, it was the most tangible step by the entire asphalt industry, including clients, contractors and manufacturers, towards improving worker safety as well as reducing environmental impact,” said Naidoo. “When compared to hot mix asphalt, warm mix asphalt cools at a lower rate, so the paving season is extended, allowing road repairs and construction to finish more quickly. “This benefit helps save time and money on labour and equipment, as workers and tools are needed for a smaller span of time and projects can be finished more quickly. It also lessens the impact on traffic, as projects finish faster and there are less interruptions to roadways.” The benefits of WMA, Naidoo said, were now being realised by more clients country wide and have also been included in the draft revision of COTO – Standard Specifications for Road and Bridge Works. “To date South Africa has successfully produced and paved over a million tons of WMA. The latest success story has been the 370 km haul of asphalt to a SANRAL job in Harrismith,” said Naidoo. He added that with the impending implementation of the Carbon Tax Bill, WMA will help contribute to allow some way to offset the tax. 

VERSATILE POTHOLE SOLUTION

Having been tested and rolled out across South Africa for over a decade, National Asphalt’s Cold Mix has proved to be a highly effective response to the country’s growing pothole problem, and can even be used to repair larger sections of road.

“M anufactured using the high quality Macfix® additive from UK-based specialists Macismo, our Cold Mix can be supplied in bags and in bulk, and is produced to the same exacting standards as all our asphalt products,” says National Asphalt general manager Dave Bennett. National Asphalt, a member of the JSE-listed Raubex Group, has

held the exclusive agency for Macfix® since 2011 and has applied the product across South Africa, as well as neighbouring states and the Indian Ocean islands. “A significant advantage of Cold Mix is that it can be ordered in affordable quantities to suit small contractors, and can be applied in a labour-intensive manner, providing greater opportunity

36

CONSTRUCTION WORLD JANUARY 2019