Electricity + Control September 2017

round up

CONTROL SYSTEMS + AUTOMATION

RJ45-connectors with right-angled grip body

ESCHA, Supplied locally by RET Automation Controls , offers high- grade RJ45-patchcords with right-angled grip body.The right-angled versions facilitate an optimal cable run for applications with limited space conditions. The overmolded grip body averts snapped off- or broken cables and thus guarantees a faultless data transmission according to Cat5e. ESCHA RJ45-patchcords meet IP20 protection class requirements and are especially adapted for automation solu- tions within the switch cabinet.

More patchcords in tight space The advanced system decentralisation makes smaller and smaller switch cabinets necessary. Therefore, patchcords must be installed in tighter and tighter spaces. This can cause snapped off- or even broken cables consequently leading to a lower data transmission, loss of data or standstill. Cables can be particularly space-saving in- stalled with ESCHA right-angled RJ45-patchcords. The overmolded grip body provides for safety, stability, and guarantees a safe data

transmission. In order to satisfy all individual re- quirements, ESCHA offers the new RJ45-patch- cords in ‘right-angled on right-angled’ as well as ‘right-angled on straight’ variants. Thanks to UL-certification, all patchcords can be used on the North American market. Original accessories For RJ45-connectors deeply placed in ports with their release lug hard- or not at all accessible, the connectivity specialist has had the ESCHA mul- ti-clip on offer already for a long time. This is quite easily plugged onto the grip body providing for fast unlocking and locking. The ESCHA multi-clip is available in eleven colours and does not only fit on the previously available straight grip bodies, but also on the new right-angled variants. Enquiries: BrandonTopham. Tel. +27 (0) 11 453 2468 or email brandon.topham@retautomation.com

Laser sensor and distant measurement sensors The O5D with time of flight technology (PMD = Photonic Mixer Device) combines the following advantages: long range, reliable background suppression, visible laser light and high excess gain. In the same price range as standard sensors, it is a clever alternative. The switch point is set easily to the nearest centimetre via ‘+/-’ buttons and display or alternatively via IO-Link, allowing read-out of the actual value. Polished, matt, dark or light objects of any colour: The O5D fea- tures reliable background suppression. The unit allows any angle of incidence and thus flexibility of mounting. This simplifies instal-

lation and saves costs. Some applications for these sensors include detection on a convey- or belt in the confectionery industry, identification and detection of interchangeable tools and the loading condition of conveyor belts. Enquiries: Tel. +27 (0) 12 450 0400 or email info.za@ifm.com