Lighting in Design Q4 2021

creates an elegant arch over the bar and frames the magnificent view, drawing your focus to the horizon. Thedesignchallengewas tominimisemovement and control the positioning of the suspended bulbs. Clear acrylic frames were designed to easily clip in between fittings and prevent the bulbs from colliding. To eliminate individual fixing points of the light bulbs onto the concrete arched ceiling, the fitting had to incorporate a bespoke u-shaped ceiling cup. This allowed fastening of the individual bulbs onto the ceiling cup at Regent Lighting’s factory, allowing only the assembly and suspension of the ceiling cups on site. Formal seating area On either side of the bar, above the more formalised, intimate seating areas, are bespoke 26-way rectangular grid luminaires recess mounted into the ceiling. The steel grid was laser cut and fabricated from sheet metal to create the desired

PRODUCTS SUPPLIED Bespoke arched 171-way pendant 2200 K Bespoke 26-way rectangular grid luminaire Bespoke 750 mm long wall bracket with 350 mm diameter spun brass disk

Mito 135 14.5 W recessed downlighter Raco 68 12 W surface mounted spotlight

9

LiD Q4 - 2021