Sparks Electrical News November 2017

CONTRACTORS’ CORNER

9

RELIABLE AND FAST PRINTER

VHB TAPE GPH SERIES LAUNCHES IN SOUTH AFRICA

BUFFER MODULES BRIDGE CYCLICAL FAILURES LASTING UP TO 30 SECONDS

The BradyPrinter i7100 Industrial label printer is a reliable heavy-duty label printer that prints a wide range of high quality identification material for a variety of applications including cable, printed circuit board and asset and component identification. BradyPrinter i7100 offers highly accurate label printing for business critical high volume identification challenges. The printer features a powerful internal processor, up to 300 mm/sec print speed, 600 dpi ul- tra-sharp printing and is designed to handle up to 7000 labels per day. High printing accuracy is achieved through centre alignment of prints on a wide range of high quality identification materials for a variety of applications. The i7100 also features interchangeable platen rollers to optimise the print head life time. The new printer has an intuitive colour touch screen interface with distinctive icons for easy access to the printer’s menus. The printer’s foldable cover allows for a small system footprint and enables users to quickly change consumables to start a new job or continue printing. The i7100 can print on a wide range of high quality, durable and spe- cialty label identification materials for electronics, aerospace, defence and mass transit manufacturers, automotive, logistics, ICT Infrastructure and Telecom industries. Label materials include heat-shrinkable sleeves,

T he 3M VHB Tape GPH se- ries is a permanent bond- ing solution that can replace traditional mechanical fasteners and liquid adhesives in challeng- ing, high temperature applications. It uses a conformable, acrylic foam core to provide a good balance of strength and conformability. The new series helps break the barriers of traditional construction el- ements. It adheres instantly with high initial tack on a broad range of sub- strates like metal, glass, ABS plastics, rigid PVC, and polycarbonate. Appli- cation possibilities are almost end- less, and users can design projects with total freedom. The series has excellent tem- perature resistance and works under severe conditions. It combines high temperature resistance and multi material bonding. Its strong bond to metals, combined with a short term temperature resistance of up to +230 °C, make it ideal for permanent bonding even in tough high tempera- ture applications like powder coat or liquid painting. The soft foam provides excellent stress relaxation and gap filling. The conformability of 3M™ VHB™ Tape

GPH allows for a more complete bond contact area when bonding rigid or irregular materials. With the new series, projects will move ahead quickly, improving productivity and giving users the competitive edge. The tapes are simple and easy to apply. The strong ‘quick stick’ tech- nology creates high initial handling strength. They save time, costs and space as there is no need for cur- ing. The new series has increased initial tack over the existing range. The tapes bond on contact, making it easy to assemble, and can be cut to precise shapes and sizes for custom applications. The product offers virtually invis- ible fastening that helps keep sur- faces smooth and clean to enhance design and appearance. Whether it’s signs, POS, appliances, metal fabri- cated panels or many other applica- tions, users can design and improve the durability of products while en- hancing the aesthetics. The series sets a new benchmark for the most demanding markets, including metalworking, appliance, specialty vehicle and signage.

The new maintenance-free Quint CAP buffer mod- ule from Phoenix Contact bridges cyclical failures lasting up to 30 seconds. It combines an electronic switch-over unit and maintenance-free, capacitor- based energy storage in the same housing. The lockable USB interface for connection to higher- level controllers makes it convenient to shut down the PC. The buffer module with double-layer capaci- tors offers a long buffer time thanks to high memory capacity. 5 or 10 A can be buffered for 30 seconds. Thanks to their compact design, the modules save space in the control cabinet. Furthermore, with over 20 years at 20°C and more than 500 000 charge/ discharge cycles, they have a long service life. The soft start means that the buffer modules can also be used in combination with power supplies in the low power range. Thanks to the comprehensive signal- ling options and the wide temperature range from -40°C to +60°C, they support flexible use.

high heat labels for printed cir- cuit boards and durable asset and component labels with high abrasion, chemical, temperature and UV-resistance. To further in- crease the printer’s versatility and automation compatibility, add- ons and accessories are available including a variety of label cutting systems, rewinders, sensors and technologies such as ‘peel & pre- sent’ to automatically separate a label from its liner.

Enquiries: +27 (0)11 801 8200

www.3M.com

Enquiries: emea_request@bradycorp.com

TRAINEES COMPLETE MODULES AT ECA(SA) TRAINING CENTRE

NEW ACQUISITION GIVES PERSPEX SOUTH AFRICA THE INNOVATIVE EDGE

Two groups of trainees working towards their Construction Electrician trade at the ECA(SA) training centre in Meadowdale, completed their courses (Modules 0 to 3, and Modules 4 to 6) at the beginning of September. They are: Joseph Sengwane; Siyabonga Khoza; Shepard Madzhivadondo; Lennox Phala; Tylan Armstrong; Dovhani Mbave;

PERSPEX SOUTH AFRICA has recently acquired leading lighting business, Wired 4 Signs. The reason for this strategic acquisition is to further strengthen its position in the market. This will enable the company to provide its customers with more comprehensive and innovative solutions. Complementing Perspex South Africa’s existing products such as Perspex® LED Spectrum, Perspex® Cast Acrylics as well as extruded acrylics, the wide range of LED and lighting solutions will add a new dimension to Perspex South Africa’s business. The offering in various lighting solutions, will ensure cus- tomers have more to choose from, and will offer add-

ed technical support. A wide selection of industries will benefit from this acquisition and can look forward to convenient and holistic lighting solutions. “Our passion for creativity, backed by our promise to provide solutions to our customers is evident with this acquisition and we are excited about the new op- portunities it is sure to bring with it,” says Perspex SA managing director, Stuart Hughes. Perspex South Africa is set to take over fromOcto- ber 2017, and is looking forward to adding value to its existing and new customers through this acquisition.

Emmanuel Nkuna; Mpho Tshikalaha; Masithembe Tengile and Angie Mkhomazi (ECA regional training officer).

Enquiries: www.perspex.co.za

OLFA’S GREEN SERIES OF CUTTERS

J apanese cutter giant, Olfa, has launched a range of environment friendly cutters made from recycled material. Equal durability and blade sharpness are incorporated into its green models and all the handles are made from 100% recycled plastic. “When it comes to new products, innovation and development, the Olfa Company is a leader and has cutting solutions for every con- ceivable market,” says Ryan Hunt, sales director of Vermont Sales. The Green series consists of: • ES-1/Green: Auto-lock, standard-duty model with a pocket clip/ blade snapper, for right- and left-handed users. The handle and all plastic parts are made from 100% recycled materials. With easy disassembly for next recycling, the ES-1 is a Japanese Eco- marked product authorised by JEA, and conforms to Japanese law on promoting green purchasing. • SK-4/Green: This auto-retracting blade safety knife cuts back on injuries. It is for right- and left-handed users and the handle and all plastic parts are made from 100% recycled materials without sacrificing durability and handle comfort. • SK-7/Green: The compact auto-retracting blade safety cutter is designed with a lighter weight, and fits most hand sizes. For both right- and left-handed users, the flush and low-positioned blade slider reduces accidental blade exposure while inside a pocket. Easily disassembled for next recycling, it is a Japanese Eco-

marked product authorised by JEA and conforms to Japanese law on promoting green purchasing. • L-1/Green: The original and the world’s most popular multi-pur- pose heavy-duty cutter also has an environment-friendly version. The handle is made from recycled ABS without sacrificing its original durability and hand feeling and the cutter conforms to Japanese law on promoting green purchasing.

Enquiries: +27 (0)11 314 7711

SPARKS ELECTRICAL NEWS

NOVEMBER 2017